Gasket Maker

Features:
1.High and low temperature resistant from -60°C and high 345°C (650°F).
2.Neutral curing silicone gasket.
3.High modulus and very low shrinkage on curing.
4.Resistant against fuels, oils, water, freeze etc..
5.After cure form a cold and heat resistant, non-corrosive, flexible sealant body.

Main applications :  
1.Used for sealing of cover joint of automobile, motorcycle, and all kinds of hydraulic machinery, water pump, oil pump, hydraulic pump and air compressor etc..
2.Timing gear covers, transmission pans, valve covers, oil pans, engine.
3.Used in many other industrial applications.

Limitations:
1.For best results, clean and dry all surfaces with a residue-free solvent.
2.Operation should be carried out in well ventilated area.
3.This product should be operated at temperature 5-40°C, relative humidity 40-80%.
4.Not for use on oxygen sensor equipped vehicles.
5.After operation, take off the cap mouth immediately, close the packing cover tightly to prevent the moisture enter and cause solidification..
6.Not suggested to touch the food directly.
7.Keep out of the reach of children

Typical properties:
As Supplied – tested at 23°C±2°C, RH50%±5%: 
Aspect:                     White Tixotropic Paste
Specific Gravity:                1.15~1.25
Skinning Time, min:               5~15
Application Temperature, °C:       +5 to +40
Drop Degree, MM:               ≤1
Extrusion Ability, mL/Min:           ≥ 300

Installation:
1.Clean the surface to get rid of the rust, oil, or any dirty.
2.Cut the cap point, twists the cap mouth, cut at 45 degree angle beveling according to need.
3.In order to get the smooth glue, hold the bottle at 45 degree angle, squeeze the glue through cap mouth.
4.If further sealing needed, please finished operation within 5 minutes, wipe off the surplus glue with dry tissue.
5.After completely solidify, amend the glue by knife.

Emergent Treatment:
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.

Shelf Life:
12 months from the manufacture date stored in cool & dry place below 27 ℃.

Color:
Clear, black, white, gray, other colours as clients’requirement.

Packing:
85 gram per tube, 12 tubes in a box, 12 boxes in a master carton.

LIMITED WARRANTY INFORMATION – PLEASE READ CAREFULLY

The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer’s tests to ensure that Foshan Shunde Mimdy Sealant Co., Ltd.’s products are safe, effective, and fully satisfactory for the intended end use.

FOSHAN SHUNDE MIMDY SEALANT CO., LTD.SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.

FOSHAN SHUNDE MIMDY SEALANT CO., LTD. DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.